Pro Clima TESCON PROFECT - Pre-fol­ded corner ad­hes­ive tape - width 5cm

Substrate

Be­fore bond­ing, the sub­strate sur­face should be swept clean with a broom or wiped with a cloth.
Bond­ing to frozen sur­faces is not pos­sible. The sub­strate ma­ter­i­al must be free of wa­ter-re­pel­lent sub­stances (e.g. grease or sil­ic­one). Sub­strates must of­fer suf­fi­cient load-bear­ing ca­pa­city.

Per­man­ent ad­he­sion to all pro clima mem­branes (va­pour-re­tard­ing and air­tight­ness mem­branes, trickle pro­tec­tion mem­branes and roof lin­ing, sark­ing and wall lin­ing mem­branes) and PE, PA, PP alu­mini­um films for cre­at­ing air­tight­ness or windtight­ness.
Bond­ing is also pos­sible with planed and painted wood, high dens­ity plastic and met­al (e.g. pipes, win­dows etc.), hard­board (chip­board, OSB and ven­eer ply­wood, MDF board and soft­wood fibre sub-roof pan­els).
Pre-treat wood fibre sub-roof pan­els with TESCON PRIMER RP. Con­crete or plaster sub­sur­faces must not be sandy or crum­bling.

The best res­ults for the safety of the struc­ture can be achieved on high-qual­ity sub­strates.
You are re­spons­ible for check­ing the suit­ab­il­ity of the sub­strate.
Ad­he­sion tests are re­com­men­ded.

General conditions

The bonds should not be subjected to tensile strain.
After sealing the vapour retarding membranes, the weight of the insulating material must be borne by lathing.
The adhesive tape should be supported by battens if necessary.
Press firmly to secure the adhesive tapes, taking care to ensure that there is sufficient resistance pressure behind them.
Windproof, airtight or rainproof seals can only be achieved on vapour retarding membranes, roof lining membranes or façade membranes that have been laid without folds or creases.
Ventilate continuously and systematically to prevent build-up of excessive humidity; use a dryer if necessary.